|Grade||Genuine Patek Philippe||AAAAA Clone||AAA Replica||A Replica|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Patek Philippe||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Patek Philippe Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Band Type||Leather Strap|
|Case Color||Rose Gold-tone|
|Dial Color||Grey Dial|
Band Material: Leather.A leather band is used for the watch, which has become synonymous with steady and grace.
Watch Case: 316L. The material in this case comes from 316L steel, which is a very strong and corrosion resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Crystal: Sapphire Crystal. The crystal design is a very common glass that can protect your watch from scratches. Tips: The A Replica is applied with mineral glass instead of sapphire.
Hand: Rose Gold-tone. The watch’s hands is rose gold-tone, which can highly improve the outlook of the watch.
Second Markers: Minute Markers around the outer rim. The minute mark on the outer edge of the glass is a design element that represents time. As shown in the figure above, the minute mark around the outer edge.
Dial Markers: Luminous Index. The luminous sticks is a new type of sensor that can detect time in the dark. When receiving a signal from an external source, this sticks will light up. It then sends a signal to the computing device, telling it when to turn the lights on and off.
Luminiscence: Hands and Markers. About the luminosity of the watch is hands and markers. With this watch, you can know time anywhere and anytime.
Bezel Material: Stainless Steel. The watch uses a stainless steel bezel, which made of stainless steel bezel material. It needs to be durable and can resist abrasion. The design of stainless steel bezel material makes it suitable for the watch bezel because of its ability to withstand a lot of pressure and friction.
Clasp: Deployment. Deployment clasps are used here to make it easier and faster for the user to open and fold the watch case to keep it secure.
Water Resistance: 30 meters. A good waterproof of the watch has been applied, it is 30 meters that’s enough for no worries. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.